IBM Books

Multiprotocol Routing Services
Protocol Configuration Reference
Version 3.3 Volume 1


Index

Numerics
A B C D E F G H I J L M N O P Q R S T U V W
Numerics
  • 8209 bridges (2762)
  • A
  • access control rule parameters (3072)
  • addresses (3075)
  • ICMP message type and code (3082)
  • IP protocol number (3076)
  • next hop gateway address selection (3087)
  • packet filter name (3094)
  • precedence and TOS filtering support (3084)
  • security logging options (3092)
  • source address verification (3096)
  • SysLog facility option (3090)
  • TCP connection establishment (SYN) filtering (3080)
  • TCP/UDP source and destination port numbers (3078)
  • type (3073)
  • access controls
  • IP filtering (3067)
  • IP monitoring command (3160)
  • IPX monitoring command (3781)
  • activate
  • CIP monitoring commands (3673)
  • RSVP monitoring command (3430)
  • Adaptive Source Routing Transparent bridge (ASRT) (2594), (2744)
  • basic configuration procedures (2784)
  • bit ordering in STB and SRB bridges (2740)
  • bridge-only management (2750)
  • bridging basics (2570)
  • bridging tunnel (2746)
  • encapsulation and OSPF (2748)
  • configuration matrix (2742)
  • configuring (2741), (2782), (2785)
  • description of (2701)
  • eliminating packet size problems (2738)
  • Ethernet packet format translation (2612)
  • hardware address filtering (2739)
  • MIB support (2752)
  • multiaccess bridge port
  • configuring (2773)
  • description (2769)
  • interoperation with 2218 (2776)
  • multiaccess database (2771)
  • overview (2575)
  • complex bridges (2580)
  • CSMA/CD MAC frames (2590)
  • local bridges (2581)
  • MAC bridge frame formats (2572), (2588)
  • operation and protocol architecture (2584)
  • point-to-point links (2586)
  • remote bridges (2582)
  • simple bridge (2579), (2585)
  • token-ring MAC frames (2592)
  • protocol filtering (2576)
  • source routing bridge (SRB) (2657)
  • operation (2660)
  • source routing frames (2662)
  • spanning tree explore option (2666)
  • spanning tree bridges (2611)
  • spanning tree explore option
  • balancing traffic loads (2671)
  • simulating a network (2669)
  • SR-TB bridging (2706)
  • SR-TB Conversion
  • SR-TB conversion
  • description of (2702)
  • general description (2703)
  • operation (2704), (2705)
  • SRB terminology and concepts
  • bridge instance (2674)
  • bridge number (2676)
  • explorer frames (2678)
  • interface number (2680)
  • overview (2673)
  • route (2682)
  • route discovery (2684)
  • segment number (2686)
  • source routing (2688)
  • TCP/IP host services (2751)
  • terminology and concepts (2615), (2707)
  • aging time (2617)
  • all routes broadcast (2709)
  • all stations broadcast (2711)
  • bridge (2619), (2713)
  • bridge address (2621)
  • bridge hello time (2623)
  • bridge identifier (2625)
  • bridge maximum age (2627)
  • bridge number (2715)
  • bridge priority (2629)
  • designated port (2633)
  • destination bridge (2631)
  • explorer frames (2717)
  • filtering and permanent databases (2635)
  • parallel bridges (2637)
  • path cost (2639)
  • port (2641)
  • port ID (2643)
  • port number (2645)
  • port priority (2647)
  • resolution (2649)
  • ring number (2719)
  • root bridge (2651)
  • root port (2653)
  • route (2721)
  • route designator (2723)
  • route discovery (2725)
  • segment number (2727)
  • single route broadcasting (2729)
  • source routing bridging (2731)
  • spanning tree (2655), (2733)
  • transparent bridging (2735)
  • transparent bridge (STB)
  • network requirements (2601)
  • operation of (2604)
  • overview (2596)
  • routers and transparent bridges (2598)
  • shaping the spanning tree (2609)
  • transparent-source routing compatibility (2737)
  • add
  • ARP over ATM configuration commands (3603)
  • ASRT bridge configuration command (2801)
  • ASRT bridge monitoring command (2867)
  • BAN configuration command (2841)
  • CIP configuration commands (3602)
  • DLSw configuration command (3501)
  • DVMRP configuration command (3383)
  • IP configuration command (3131)
  • IP route filter policy configuration command (3154)
  • IPX configuration command (3731)
  • IPX over ATM configuration command (3605)
  • OSPF configuration command (3241)
  • RSVP configuration command (3422)
  • SNMP configuration command (3447)
  • SNMP monitoring command (3462)
  • TCP/IP host services configuration command (2993)
  • Tunnel configuration command (2852)
  • add entry
  • ARP configuration commands (3573)
  • address entries
  • dynamic (2827), (2875), (2887)
  • free (2828), (2876)
  • permanent (2825), (2873), (2885)
  • registered (2824), (2872), (2884)
  • reserved (2823)
  • static (2826)
  • addresses, entering
  • CIP (3557)
  • advertisement Expansion
  • OSPF monitoring command (3259)
  • AppleTalk
  • split-horizon routing (3725)
  • APPN
  • interface support (3484)
  • area summary
  • OSPF monitoring command (3261)
  • ARP
  • configuring (3566)
  • displaying statistics (3663)
  • monitoring (3644)
  • translation cache (3537)
  • with AppleTalk threading (2768)
  • with IP threading (2765)
  • ARP configuration commands
  • add entry (3574)
  • change entry (3576)
  • delete entry (3578)
  • disable auto-refresh (3580)
  • enable auto-refresh (3584)
  • list (3586)
  • set (3589)
  • summary of (3571)
  • ARP monitoring commands
  • accessing (3641)
  • clear (3648)
  • dump (3652)
  • hardware (3655)
  • protocols (3658)
  • redundancy-state (3704)
  • statistics (3661)
  • summary of (3643)
  • ARP over ATM
  • add (3606)
  • Classical IP, description (3539)
  • configuration commands, summary (3595)
  • effect on ARP table (3600)
  • IPX and ARP over ATM, description (3560)
  • ARP over ATM configuration commands
  • accessing (3568)
  • add (3615)
  • delete (3621)
  • list (3633)
  • reorder (3637)
  • ARP over ATM monitoring commands
  • delete (3678)
  • display (3683)
  • dump (3688)
  • hardware (3693)
  • ping (3698)
  • protocol (3703)
  • statistics (3710)
  • summary of (3664)
  • ARP table
  • CIP (3599)
  • IPX over ATM (3598)
  • AS boundary routing, OSPF (3220)
  • AS-external advertisements
  • OSPF monitoring command (3263)
  • ASRT
  • See Adaptive Source Routing Transparent bridge (2571), (2595), (2745)
  • ASRT bridge configuration commands
  • add (2800)
  • and IP tunnel (2836)
  • ASRT Bridge configuration command (2832)
  • ban (2808)
  • BAN commands (2838)
  • BAN configuration commands
  • add (2840)
  • delete (2843)
  • list (2846)
  • change (2810)
  • delete (2812)
  • disable (2816)
  • duplicate MAC addresses (2803)
  • enable (2818)
  • functional address to group address mapping (2804)
  • IP tunnel commands (2849)
  • list (2820)
  • NetBIOS filtering commands
  • summary (2933)
  • NetBIOS filtering concepts (2754)
  • NetBIOS filtering configuration commands
  • create (2935)
  • delete (2938)
  • disable (2941)
  • enable (2944)
  • filter-on (2947)
  • list (2950)
  • update (2953)
  • port maps explained (2802)
  • set (2831)
  • summary of (2787)
  • tunnel (2834)
  • tunnel configuration commands
  • add (2851)
  • delete (2854)
  • join (2857)
  • list (2860)
  • ASRT bridge monitoring commands
  • add (2866)
  • ban (2868)
  • BAN monitoring commands
  • discussion (2892)
  • list (2894)
  • cache (2870)
  • delete (2878)
  • flip (2880)
  • list (2882)
  • NetBIOS (2888)
  • NetBIOS filtering monitoring commands
  • list (2958)
  • summary (2956)
  • ASRT bridge NetBIOS feature
  • prompt (2793), (2863)
  • ASRT bridge NetBIOS-filtering feature
  • prompt (2795), (2865)
  • ASRT bridge tunnel feature
  • prompt (2791)
  • ASRT configuration commands
  • list
  • filtering (2822)
  • netbios (2830)
  • assigning IP addresses to bridge network interfaces (3049)
  • ATM addresses
  • CIP (3553)
  • ATM addressing in IPX
  • ESI (3043)
  • selector (3042)
  • attach
  • IPX filter configuration command (3749)
  • auto-refresh
  • disabling (3581)
  • enabling (3582)
  • B
  • balancing SNA and NetBIOS traffic (3486)
  • BAN
  • ASRT bridge configuration command (2809)
  • ASRT bridge monitoring command (2869)
  • DLSw (3503), (3530)
  • opening service access points (2781)
  • BAN configuration commands
  • add (2839)
  • delete (2842)
  • list (2845)
  • summary (2837)
  • BAN monitoring Commands
  • BAN monitoring commands
  • accessing (2890)
  • discussion (2891)
  • list (2893)
  • BGP
  • configuring (3301)
  • connections between autonomous systems (3299)
  • default originate policy (3309)
  • defining neighbors (3303)
  • defining policies (3305)
  • enabling (3302)
  • excluding routes (3310)
  • how BGP works (3297)
  • including routes (3308)
  • internal and external neighbors (3304)
  • messages (3300)
  • overview (3296)
  • policy types (3306)
  • receive policy (3311)
  • routes
  • advertising all (3315)
  • blocking specific (3313)
  • importing all (3312)
  • sample policy definitions (3307)
  • send policy (3314)
  • TCP connections (3298)
  • BGP configuration commands (3317), (3323), (3328), (3336), (3341) , (3346)
  • add
  • aggregate (3318)
  • neighbor (3319)
  • no-receive (3320)
  • receive (3321)
  • send (3322)
  • change
  • change originate (3324)
  • change receive (3326)
  • change send (3327)
  • delete
  • aggregate (3329)
  • neighbor (3330)
  • no (3331)
  • originate (3332)
  • receive (3334)
  • send (3335)
  • disable
  • bgp speaker (3337)
  • classless-bgp (3338), (3339)
  • neighbor (3340)
  • enable
  • bgp speaker (3342)
  • classless-bgp (3343)
  • compare-med-from-diff-AS (3344)
  • neighbor (3345)
  • list
  • aggregate (3347)
  • all (3348)
  • bgp speaker (3349)
  • neighbor (3350)
  • no (3351)
  • originate (3352)
  • receive (3354)
  • send (3355)
  • move (3356)
  • policy-to-neighbor (3325), (3333), (3353)
  • set (3357)
  • update (3358)
  • BGP monitoring commands
  • destinations (3360)
  • advertised (3361)
  • received (3362)
  • disable neighbor (3363)
  • dump routing tables (3364)
  • enable neighbor (3367)
  • neighbors (3368)
  • parameter (3369)
  • paths (3370)
  • ping (3371)
  • policy-list (3373)
  • reset neighbor (3375)
  • sizes (3376)
  • traceroute (3377)
  • BOOTP
  • enabling/disabling (3106)
  • server (3109)
  • Bootstrap monitor
  • forwarding process (3104)
  • Bootstrap protocol (3103)
  • Boundary Access Node (BAN)
  • configuring (2779)
  • using (2778)
  • boundary routing, OSPF (3222)
  • bridge
  • MAC frame formats (2573), (2589)
  • point-to-point links (2587)
  • bridge and router (2600)
  • bridge network interface (3051)
  • bridges
  • basic operation (2583)
  • overview (2574)
  • types (2578)
  • versus routers (2577)
  • bridging and routing (3019)
  • overview of RFC 1483 support (3026)
  • RFC 1483 support for IPX routing (3028)
  • support for IPX routing (3038)
  • support of PVCs and SVCs (3037)
  • bridging features (2743)
  • bridging tunnel
  • description of (2747)
  • encapsulation and OSPF (2749)
  • C
  • cache
  • ASRT bridge monitoring command (2871)
  • IP monitoring command (3162)
  • IPX monitoring command (3783)
  • TCP/IP host services monitoring command (3010)
  • change
  • ARP over ATM configuration commands (3612)
  • ASRT bridge configuration command (2811)
  • CIP configuration commands (3611)
  • DVMRP configuration command (3385)
  • IP configuration command (3133)
  • IPX over ATM configuration command (3614)
  • change entry
  • ARP configuration command (3575)
  • CIP
  • ATM addresses (3552)
  • components (3545)
  • configuration commands, summary (3593)
  • configuring (3564)
  • description (3541)
  • effect on ARP table (3597)
  • how to enter addresses (3558)
  • IP addresses (3550)
  • key configuration parameters (3556)
  • logical IP subnets (LIS) (3542)
  • refresh (3548)
  • timeout (3546)
  • virtual channel connection (VCC) (3554)
  • CIP configuration commands
  • accessing (3567)
  • add (3601)
  • change (3610)
  • delete (3616)
  • disable (3622)
  • Enable (3625)
  • list (3628)
  • Reorder (3634)
  • set (3638)
  • CIP monitoring commands
  • activate (3672)
  • delete (3674)
  • display (3679)
  • dump (3684)
  • hardware (3689)
  • ping (3694)
  • protocols (3699)
  • statistics (3706)
  • summary of (3665)
  • Classical IP and ARP over ATM
  • description (3540)
  • clear
  • ARP monitoring commands (3649)
  • IPX circuit-based filter command (3815), (3817)
  • close SAP
  • DLSw configuration command (3505)
  • command summary
  • BGP (3316), (3359)
  • LNM (2966)
  • configuration commands
  • DLSw (2905)
  • LNM (2967)
  • NetBIOS (2906)
  • configuration environment
  • accessing (2910)
  • configuration parameters
  • setting for ARP (3590)
  • configuring
  • Gateway, redundant IP (3121)
  • multiaccess bridge port (2775)
  • redundant IP Gateway (3120)
  • configuring IPX (3726)
  • configuring Virtual Router Redundancy Protocol (3118)
  • counters
  • IP monitoring command (3164)
  • IPX monitoring command (3785)
  • create (2936)
  • IPX filter configuration command (3751)
  • D
  • database
  • permanent (2874), (2886)
  • database summary
  • OSPF monitoring command (3265)
  • default
  • IPX filter configuration command (3753)
  • delete
  • ARP over ATM configuration commands (3618)
  • ARP over ATM monitoring commands (3677)
  • ASRT bridge configuration command (2813)
  • ASRT bridge monitoring command (2879)
  • BAN configuration command (2844)
  • CIP configuration commands (3617)
  • CIP monitoring commands (3675)
  • DLSw configuration command (3507)
  • DVMRP configuration command (3387)
  • IP configuration command (3135)
  • IPX configuration command (3733), (3787)
  • IPX filter configuration command (3755)
  • IPX over ATM configuration command (3620)
  • IPX over ATM monitoring commands (3676)
  • NetBIOS filtering configuration command (2939)
  • OSPF configuration command (3243)
  • RSVP configuration command (3424)
  • SNMP configuration command (3449)
  • SNMP monitoring command (3464)
  • TCP/IP host services configuration command (2995)
  • Tunnel configuration command (2855)
  • delete entry
  • ARP configuration command (3577)
  • demand circuit (3230)
  • detach
  • IPX filter configuration command (3757)
  • disable
  • ARP over ATM configuration commands (3624)
  • ASRT bridge configuration command (2817)
  • CIP configuration commands (3623)
  • DLSw configuration command (3509)
  • DVMRP configuration command (3389)
  • IP configuration command (3137)
  • IPX circuit-based filter command (3819)
  • IPX configuration command (3735), (3789)
  • IPX filter configuration command (3759)
  • LNM configuration command (2971)
  • NetBIOS filtering configuration command (2942)
  • OSPF configuration command (3245)
  • RSVP configuration command (3425)
  • SNMP configuration command (3451), (3453)
  • SNMP monitoring command (3466), (3468)
  • TCP/IP host services configuration command (2997)
  • disable auto-refresh
  • ARP configuration command (3579)
  • display
  • ARP over ATM monitoring commands (3682)
  • CIP monitoring commands (3680)
  • IPX over ATM monitoring commands (3681)
  • DLSw
  • configuration environment (2911)
  • configuration procedure (3497)
  • configuration requirements (3489)
  • configuring (3496)
  • configuring ASRT for DLSw (3490)
  • configuring IP for DLSw (3491), (3492)
  • configuring NetBIOS for (2913)
  • configuring the SDLC interface (3493)
  • interoperability considerations (3825)
  • interoperability with IBM 6611
  • bridge configuration (3824)
  • IP configuration considerations (3826)
  • monitoring (3526)
  • multicast addresses (3514)
  • overview (3477)
  • TCP interoperability considerations (3827)
  • using (3475)
  • X.25 requirement for QLLC (3494)
  • DLSw configuration commands
  • add (3500)
  • BAN (3502)
  • close SAP (3504)
  • delete (3506)
  • disable (3508)
  • enable (3510)
  • join group (3512)
  • leave group (3515)
  • list (3517)
  • priority (3519)
  • netbios (3520), (3534)
  • open SAP (3522)
  • set (3524)
  • summary of (3498)
  • DLSw monitoring commands
  • add (3529)
  • list
  • dls sessions nb (3531)
  • tcp capabilities (3532)
  • tcp statistics (3533)
  • netbios (3521), (3535)
  • set
  • priority (3536)
  • summary of (3527)
  • dump
  • ARP monitoring commands (3653)
  • ARP over ATM monitoring commands (3687)
  • CIP monitoring commands (3685)
  • IPX monitoring command (3791)
  • IPX over ATM monitoring commands (3686)
  • SCSP monitoring command (3719)
  • TCP/IP host services monitoring command (3008)
  • dump routing tables
  • BGP monitoring command (3365)
  • DVMRP monitoring command (3396)
  • IP monitoring command (3166)
  • OSPF monitoring command (3267)
  • DVMRP
  • monitoring (3379)
  • DVMRP configuration commands
  • add (3382)
  • change (3384)
  • delete (3386)
  • disable (3388)
  • enable (3390)
  • list (3392)
  • summary of (3381)
  • DVMRP monitoring commands
  • dump routing tables (3395)
  • interface summary (3397)
  • join (3399)
  • leave (3401)
  • mcache (3403)
  • mgroups (3405)
  • summary of (3394)
  • Dynamic Address (3047)
  • E
  • enable
  • ARP over ATM configuration commands (3627)
  • ASRT bridge configuration command (2819)
  • CIP configuration commands (3626)
  • DLSw configuration command (3511)
  • DVMRP configuration command (3391)
  • IP configuration command (3140)
  • IPX circuit-based filter command (3821)
  • IPX configuration command (3737), (3793)
  • IPX filter configuration command (3761)
  • LNM configuration command (2974)
  • NetBIOS filtering configuration command (2945)
  • OSPF configuration command (3247)
  • RSVP configuration command (3426)
  • TCP/IP host services configuration command (2999)
  • enable auto-refresh
  • ARP configuration command (3583)
  • enabling access control (3068)
  • end system identifier (ESI) (3040)
  • exit (2798)
  • console command (2799)
  • F
  • filter-lists
  • IPX configuration command (3739)
  • IPX monitoring command (3797)
  • filter-on (2948)
  • filters
  • IPX monitoring command (3795)
  • flip
  • ASRT bridge monitoring command (2881)
  • forwarding process (3105)
  • frame command (3741)
  • frame size
  • for NetBIOS (2919)
  • fully meshed network (3031)
  • functional address to group address mapping (2805)
  • G
  • getting help (2796)
  • global access control list, defining (3069)
  • H
  • hardware
  • ARP monitoring commands (3656)
  • ARP over ATM monitoring commands (3692)
  • CIP monitoring commands (3690)
  • IPX over ATM monitoring commands (3691)
  • help
  • console command (2797)
  • I
  • ICMP message type and code (3083)
  • IGMP
  • igmp
  • configuring (3150)
  • IP configuration command (3168)
  • IGP (Interior Gateway Protocol) (3202)
  • interface addresses
  • IP monitoring command (3170)
  • interface summary
  • DVMRP monitoring command (3398)
  • OSPF monitoring command (3269)
  • interface, bridge network (3050)
  • internal IP address (3053)
  • Inverse ARP
  • configuration commands (3572)
  • configuring (3565)
  • overview (3538)
  • IP (3117)
  • adding UDP Broadcast destinations (3116)
  • addresses, assigning to the bridge network interface (3052)
  • addressing network interfaces (3045)
  • ARP net routing (3064)
  • ARP subnet routing (3063)
  • autonomous systems (3203)
  • BootP/DHCP forwarding process (3102)
  • configuring (3127)
  • disabling BOOTP forwarding (3108)
  • disabling UDP Forwarding (3114)
  • dynamic routing (3055)
  • enabling BOOTP forwarding (3107)
  • enabling UDP Forwarding (3113)
  • interior gateway protocols (3201)
  • monitoring (3156)
  • OSPF and multicast routing (3211)
  • OSPF protocol (3056), (3200)
  • RIP protocol (3058), (3204)
  • RSVP protocol (3410)
  • setting the internal address (3054)
  • sizes command (3187)
  • static routing (3061)
  • IP addresses
  • CIP (3551)
  • IP and SNA integration
  • TN3270E Server (3110)
  • IP basic configuration procedures (3044)
  • using Dynamic Address (3046)
  • using Simple Internet Access (3125)
  • IP configuration commands
  • add (3130)
  • change (3132)
  • delete (3134)
  • disable (3136)
  • enable (3139)
  • igmp (3167)
  • list (3144)
  • move (3146)
  • set (3148)
  • summary of (3129)
  • update (3151)
  • IP filtering
  • access controls (3066)
  • description (3065)
  • route filtering without policies (3098)
  • using routing policies (3100)
  • IP monitoring commands (3171)
  • access controls (3159)
  • cache (3161)
  • counters (3163)
  • dump routing tables (3165)
  • interface addresses (3169)
  • ping (3173)
  • reset (3175)
  • RIP (3177)
  • RIP-Policy (3179)
  • route (3181)
  • static routes (3185), (3188)
  • summary of (3158)
  • traceroute (3190)
  • udp-forwarding (3192)
  • vrid (3194)
  • vrrp (3196)
  • IP multicast support
  • configuring the router (3123)
  • description (3122)
  • enrolling the router (3124)
  • IP protocol number for filtering (3077)
  • IP protocol RSVP (3417)
  • IP route filter policy configuration commands
  • add (3153)
  • IP route filtering using policies (3101)
  • IP route filtering without policies (3099)
  • IP routing (3022)
  • IP tunnel configuration commands (2848)
  • IP tunnel feature
  • ASRT bridge (2788)
  • IPX
  • addressing (3721)
  • description (3720)
  • monitoring (3777)
  • routing
  • update interval (3722)
  • IPX circuit filters
  • configuring (3723)
  • IPX configuration commands (3740)
  • add (3730)
  • delete (3732), (3786)
  • disable (3734), (3788)
  • enable (3736), (3792)
  • filter-lists (3738)
  • list (3742)
  • move (3744)
  • set (3746)
  • summary of (3729)
  • IPX filter configuration commands
  • attach (3748)
  • create (3750)
  • default (3752)
  • delete (3754)
  • detach (3756)
  • disable (3758)
  • enable (3760)
  • list (3762)
  • move (3764)
  • set-cache (3766)
  • update (3768)
  • add (3770)
  • add (IPX) (3774)
  • add (RIP) (3772)
  • add (Router) (3771)
  • add (SAP) (3773)
  • delete (3775)
  • move (3776)
  • IPX monitoring commands
  • access controls (3780)
  • cache (3782)
  • circuit-based filter commands
  • clear (3814), (3816)
  • disable (3818)
  • enable (3820)
  • list (3822)
  • counters (3784)
  • dump routing tables (3790)
  • filter-lists (3796)
  • filters (3794)
  • ipxwan (3798)
  • list (3800)
  • ping (3802)
  • recordroute (3804)
  • reset (3806)
  • sizes (3808)
  • slist (3810)
  • summary of (3778)
  • traceroute (3812)
  • IPX over ATM
  • configuration commands, summary (3594)
  • description (3559)
  • effect on ARP table (3596)
  • IPX over ATM configuration commands
  • add (3604)
  • change (3613)
  • delete (3619)
  • list (3631)
  • IPX routing (3023), (3039)
  • IPX routing support by RFC 1483 (3030)
  • ipxwan command (3799)
  • J
  • join
  • DVMRP monitoring commands (3400)
  • OSPF configuration command (3249)
  • OSPF monitoring command (3271)
  • Tunnel configuration command (2858)
  • join group
  • DLSw configuration command (3513)
  • L
  • LAN Network Manager
  • See LNM (2960)
  • leave
  • DVMRP monitoring command (3402)
  • OSPF configuration command (3251)
  • OSPF monitoring command (3273)
  • leave group
  • DLSw configuration command (3516)
  • LIS (3544) See also logical IP subnets
  • list (3183)
  • ARP configuration commands (3585)
  • ARP over ATM configuration commands (3630)
  • ASRT bridge configuration command (2821)
  • ASRT bridge monitoring command (2883)
  • BAN configuration command (2847)
  • BAN monitoring command (2895)
  • CIP configuration commands (3629)
  • DLSw configuration command (3518)
  • DVMRP configuration command (3393)
  • IP configuration command (3145)
  • IPX circuit-based filter command (3823)
  • IPX configuration command (3743)
  • IPX filtering configuration command (3763)
  • IPX monitoring command (3801)
  • IPX over ATM configuration command (3632)
  • LNM configuration command (2979)
  • NetBIOS filtering configuration command (2951)
  • NetBIOS filtering monitoring command (2959)
  • OSPF configuration command (3253)
  • RSVP configuration command (3427)
  • RSVP monitoring command (3431)
  • SCSP monitoring command (3712), (3715)
  • SNMP configuration command (3455)
  • SNMP monitoring command (3470)
  • TCP/IP host services configuration command (3001)
  • tunnel configuration command (2861)
  • list devices command (3570)
  • LLC device support (3481)
  • LNM
  • agents and functions (2962)
  • and LLC2 support (2964)
  • configuration commands (2969)
  • configuration restrictions (2963)
  • configuring (2965)
  • overview (2961)
  • LNM configuration commands
  • disable (2970)
  • agent port# (2972)
  • enable (2973)
  • agent port# (2975)
  • configuration (2977)
  • lnm port# (2976)
  • list (2978)
  • password (2980)
  • port port# (2981)
  • set (2986)
  • LNM monitoring commands
  • list (2982)
  • bridge (2983)
  • lnm ports (2984)
  • source (2985)
  • logical IP subnets
  • description (3543)
  • M
  • MAC addresses (2833)
  • MAC frames
  • CSMA/CD (2591)
  • token-ring (2593)
  • mcache
  • DVMRP monitoring command (3404)
  • OSPF monitoring command (3275)
  • memory allocation
  • for NetBIOS UI frames (2921)
  • meshed networks (3033)
  • metric, using to determine OSPF costs (3225)
  • mgroups
  • DVMRP monitoring command (3406)
  • OSPF monitoring command (3277)
  • monitoring
  • ARP over ATM monitoring commands (3668)
  • CIP monitoring commands (3666)
  • IPX over ATM monitoring commands (3667)
  • monitoring commands
  • ARP over ATM (3671)
  • CIP (3669)
  • DLSw (2907)
  • IPX over ATM (3670)
  • LNM (2968)
  • NetBIOS (2908)
  • move
  • IP configuration command (3147)
  • IPX configuration command (3745)
  • IPX filter configuration commands (3765)
  • mstat
  • OSPF monitoring command (3408)
  • mstats
  • OSPF monitoring command (3279)
  • multiaccess bridge port
  • configuring (2774)
  • description (2770)
  • interoperation with 2218 (2777)
  • multiaccess database (2772)
  • multicast exploration (3480)
  • multiple spanning trees, problems with (2760)
  • N
  • name lists
  • committing changes (2900)
  • configuring (2898)
  • configuring and monitoring (2924)
  • overview (2897)
  • using (2902)
  • neighbor discovery (3479)
  • neighbor priority (3485)
  • neighbor summary
  • OSPF monitoring command (3281)
  • NetBIOS
  • ASRT bridge (2789)
  • ASRT bridge monitoring command (2889)
  • balancing traffic with SNA (3488)
  • committing name list changes (2901)
  • configuring for DLSw (2912)
  • configuring name lists (2899)
  • frame size (2918)
  • memory allocation
  • for UI frames (2920)
  • name lists overview (2896)
  • opening NetBIOS SAPS for DLSw (2914)
  • session priority (2916)
  • using name lists (2903)
  • NetBIOS commands
  • configuration commands (2922)
  • add (2925)
  • delete (2926)
  • disable (2927)
  • enable (2928)
  • list (2929)
  • set (2930)
  • monitoring
  • summary (2923)
  • NetBIOS filtering
  • basic configuration procedures (2904)
  • building a filter (2758)
  • concepts (2755)
  • prompt (2794)
  • simple and complex filters (2759)
  • using bytes (2757)
  • using host-names (2756)
  • NetBIOS filtering configuration commands
  • create (2934)
  • delete (2937)
  • disable (2940)
  • enable (2943)
  • filter-on (2946)
  • list (2949)
  • summary of (2932)
  • update (2952)
  • NetBIOS filtering monitoring commands
  • list (2957)
  • summary of (2955)
  • NetBIOS name caching
  • description (2753)
  • NetBIOS prompt (2792), (2862)
  • NetBIOS-filtering prompt (2864)
  • network circuit
  • monitoring process (3779)
  • network hardware
  • displaying ARP-registered (3657)
  • network interface
  • clearing (3651)
  • next hop gateway address selection (3089)
  • non-volatile configuration memory
  • configuring (2909)
  • O
  • open SAP
  • DLSw configuration command (3523)
  • operational software files (3025)
  • OSPF
  • advantages over RIP (3207)
  • areas (3215)
  • AS boundary routing (3223)
  • configuration parameters (3237)
  • configuring (3199)
  • configuring over ATM (3226)
  • converting from RIP (3236)
  • demand circuit (3229)
  • description of (3206)
  • designated router (3209)
  • enabling (3057), (3212)
  • IP multicast routing (3210)
  • IP multicast routing, sort string (3217)
  • migrating from IBM 6611 (3238)
  • network interface parameters (3216)
  • non-broadcast network interface parameters (3219)
  • parameters for attached areas (3214)
  • poll interval (3233)
  • request hello suppression (3231)
  • RIP comparison (3228)
  • router IDs (3213)
  • routing explained (3208)
  • sort string IP multicast routing (3218)
  • virtual links (3227)
  • OSPF configuration commands
  • add (3240)
  • delete (3242)
  • disable (3244)
  • enable (3246)
  • join (3248)
  • leave (3250)
  • list (3252)
  • set (3254)
  • summary of (3239)
  • OSPF monitoring commands
  • advertisement expansion (3258)
  • area summary (3260)
  • AS-external advertisements (3262)
  • database summary (3264)
  • dump routing tables (3266)
  • interface summary (3268)
  • join (3270)
  • leave (3272)
  • mcache (3274)
  • mgroups (3276)
  • mstat (3407)
  • mstats (3278)
  • neighbor summary (3280)
  • ping (3282)
  • policy (3284)
  • routers (3288)
  • size (3290)
  • statistics (3292)
  • summary of (3257)
  • traceroute (3286)
  • weight (3294)
  • overview of routing (3020)
  • P
  • packet filter name (3095)
  • packet filters
  • defining (3070)
  • setting up access control rules (3071)
  • packet-filter (3172)
  • partially meshed network (3032)
  • permanent virtual circuits (3035)
  • ping
  • ARP over ATM monitoring commands (3697)
  • BGP monitoring command (3372)
  • CIP monitoring commands (3695)
  • IP monitoring command (3174)
  • IPX monitoring command (3803)
  • IPX over ATM monitoring commands (3696)
  • OSPF monitoring command (3283)
  • TCP/IP host services monitoring command (3012)
  • policy
  • OSPF monitoring command (3285)
  • policy-based routing (3088)
  • policy-list
  • BGP monitoring command (3374)
  • poll interval (3234)
  • port map (2829), (2877)
  • precedence and TOS filtering support (3085)
  • protocol
  • RSVP (3418)
  • protocol filters
  • Ethernet Type (2807), (2815)
  • SNAP packets (2806), (2814)
  • protocols
  • Adaptive Source Routing Transparent bridge (ASRT) (2783), (2786)
  • ARP (3561), (3645)
  • ARP monitoring commands (3659)
  • ARP over ATM monitoring commands (3702)
  • CIP monitoring commands (3700)
  • Classical IP and ARP over ATM (3646)
  • classical IP and ARP over ATM (3563)
  • displaying ARP-registered (3660)
  • DVMRP (3380)
  • inverse arp (3562)
  • IP (3128), (3155)
  • IPX (3728)
  • IPX and ARP over ATM (3647)
  • IPX over ATM monitoring commands (3701)
  • LAN and Internetworking
  • IPX (3727)
  • OSPF (3205)
  • OSPF (3198)
  • RIP (3060), (3142)
  • SNMP (3437), (3444), (3459)
  • TCP/IP host services (2989), (3005)
  • PVCs (3034)
  • Q
  • QLLC
  • configuring (3499)
  • device support (3483)
  • monitoring (3528)
  • X.25 requirement for DLSw (3495)
  • QoS in RSVP (3413)
  • R
  • recordroute
  • IPX monitoring commands (3805)
  • redundancy
  • ARP monitoring commands (3705)
  • redundancy configuration command (3607)
  • redundancy configuration commands
  • redundancy (3608)
  • refresh
  • CIP (3549)
  • refresh timer
  • setting (3591)
  • reorder
  • ARP over ATM configuration command (3636)
  • CIP configuration commands (3635)
  • request hello suppression (3232)
  • reset
  • IP monitoring command (3176)
  • IPX monitoring commands (3807)
  • RSVP monitoring command (3432)
  • Resource ReSerVation Protocol (RSVP)
  • configuring and monitoring (3416)
  • RFC 1483 (3018)
  • overview (3027)
  • support for IPX routing (3029)
  • RFCs (3017), (3024)
  • RIP
  • converting to OSPF (3235)
  • enabling (3059)
  • IP monitoring command (3178)
  • OSPF routes (3224)
  • processing (3141)
  • RIP-Policy
  • IP monitoring command (3180)
  • RIP/SAP
  • disable/enable (3138)
  • RIP2 (3143)
  • route
  • IP monitoring command (3182)
  • route-table-filtering (3184)
  • router
  • displaying ARP configuration of (3587)
  • displaying redundancy configuration of (3609)
  • routers
  • OSPF monitoring command (3289)
  • TCP/IP host services monitoring command (3016)
  • routing
  • OSPF (3221)
  • routing between bridging and routing interfaces (3048)
  • routing overview (3021)
  • routing tables
  • BGP dump command (3366)
  • RSVP
  • configuration commands (3421)
  • how it works (3411)
  • link types supported (3414)
  • monitoring commands (3429)
  • QoS (3412)
  • sample configuration (3415)
  • using (3409)
  • RSVP configuration commands
  • accessing (3419)
  • add (3423)
  • summary of (3420)
  • S
  • SAPS
  • opening NetBIOS SAPs for DLSw (2915)
  • save
  • SNMP monitoring command (3472)
  • SCSP monitoring command (3711)
  • SCSP monitoring commands
  • dump (3718)
  • list (3714)
  • stat (3716)
  • SDLC
  • device support (3482)
  • security logging options (3093)
  • selector (3041)
  • send
  • RSVP monitoring command (3433)
  • service access points
  • opening (2780)
  • session priority
  • for NetBIOS and DLSw (2917)
  • set
  • ARP configuration commands (3588)
  • ARP over ATM configuration commands (3640)
  • CIP configuration commands (3639)
  • DLSw configuration command (3525)
  • IP configuration command (3149)
  • IPX configuration command (3747)
  • LNM configuration command (2987)
  • OSPF configuration command (3255)
  • RSVP configuration command (3428)
  • SNMP configuration command (3457)
  • TCP/IP host services configuration command (3003)
  • set-cache
  • IPX filter configuration command (3767)
  • show
  • RSVP configuration command (3434)
  • Simple Internet Access (3126)
  • size
  • OSPF monitoring command (3291)
  • sizes
  • IPX monitoring command (3809)
  • slist
  • IPX monitoring command (3811)
  • SNA
  • balancing traffic with NetBIOS (3487)
  • DLSw (3476)
  • SNMP
  • authentication scheme (3440)
  • community (3439)
  • configuring (3436), (3443)
  • MIB support (3441)
  • monitoring (3458)
  • overview (3438)
  • trap messages (3442)
  • SNMP configuration commands
  • add (3446)
  • delete (3448)
  • disable (3450), (3452)
  • list (3454)
  • set (3456)
  • summary of (3445)
  • SNMP monitoring commands
  • add (3461)
  • delete (3463)
  • disable (3465), (3467)
  • list (3469)
  • save (3471)
  • statistics (3473)
  • summary of (3460)
  • source address verification (3097)
  • Source Routing
  • terminology and concepts
  • all routes broadcast (2710)
  • all stations broadcast (2712)
  • bridge (2714)
  • bridge number (2716)
  • explorer frames (2718)
  • ring number (2720)
  • route (2722)
  • route designator (2724)
  • route discovery (2726)
  • segment number (2728)
  • single route broadcasting (2730)
  • source routing bridging (2732)
  • spanning tree (2734)
  • transparent bridging (2736)
  • threading (2763)
  • Source Routing bridge
  • description of (2658)
  • frame types (2663), (2667)
  • operation of (2661)
  • Routing Information Field (2664)
  • spanning tree explorer frame (2665)
  • terminology and concepts (2708)
  • bridge instance (2675)
  • bridge number (2677)
  • explorer frames (2679)
  • interface number (2681)
  • route (2683)
  • route discovery (2685)
  • segment number (2687)
  • source routing (2689)
  • Source Routing Transparent bridge
  • architecture (2693)
  • description of (2690)
  • general description (2691)
  • operation of (2692)
  • terminology (2694)
  • explorer frames (2695)
  • routing information field (RIF) (2696)
  • routing information indicator (RII) (2697)
  • source routing (2698)
  • spanning tree (2699)
  • transparent bridging (2700)
  • Spanning Tree bridge (2603)
  • explore option (2668)
  • Spanning tree network
  • balancing traffic loads (2672)
  • simulation of (2670)
  • spanning tree protocol
  • with 8209 bridges (2761)
  • split-horizon routing
  • for AppleTalk (3724)
  • stat
  • SCSP monitoring command (3717)
  • static routes
  • IP monitoring command (3186), (3189)
  • static routing
  • interaction between static routing and dynamic routing (3062)
  • statistics
  • ARP monitoring commands (3662)
  • ARP over ATM monitoring commands (3708)
  • CIP monitoring commands (3707)
  • IPX over ATM monitoring commands (3709)
  • OSPF monitoring command (3293)
  • SNMP monitoring command (3474)
  • stop-rsvp
  • RSVP monitoring command (3435)
  • SVCs (3036)
  • SysLog facility option (3091)
  • T
  • Talk
  • OPCON command (3157), (3256), (3569), (3642), (3713)
  • TCP
  • interoperability considerations with DLSw (3828)
  • TCP connection establishment (SYN) filtering (3081)
  • TCP connections (3478)
  • TCP/IP host services
  • basic configuration procedures (2990)
  • configuring (2988)
  • monitoring (3004)
  • TCP/IP host services configuration commands
  • add (2992)
  • delete (2994)
  • disable (2996)
  • enable (2998)
  • list (3000)
  • set (3002)
  • summary of (2991)
  • TCP/IP host services monitoring commands
  • dump (3007)
  • interface (3009)
  • ping (3011)
  • routers (3015)
  • summary of (3006)
  • traceroute (3013)
  • TCP/UDP source and destination port numbers (3079)
  • test (2931)
  • threading
  • AppleTalk end stations (2767)
  • IP end-stations (2764)
  • IPX end stations (2766)
  • timeout
  • CIP (3547)
  • timer
  • refresh (3592)
  • TN3270E Server (3111)
  • TOS filtering support (3086)
  • traceroute
  • BGP monitoring command (3378)
  • IP monitoring command (3191)
  • IPX monitoring commands (3813)
  • OSPF monitoring command (3287)
  • TCP/IP host services monitoring command (3014)
  • translation cache
  • clearing (3650)
  • displaying (3654)
  • Transparent bridge (STB)
  • bridge ID (2607)
  • description of (2597)
  • Ethernet packet format translation (2614)
  • network requirements (2602)
  • operation of (2605)
  • port ID (2608)
  • root bridge ID (2606)
  • routers and bridges (2599)
  • shaping the spanning tree (2610)
  • spanning tree bridges (2613)
  • terminology and concepts (2616)
  • aging time (2618)
  • bridge (2620)
  • bridge address (2622)
  • bridge hello time (2624)
  • bridge identifier (2626)
  • bridge maximum age (2628)
  • bridge priority (2630)
  • designated bridge (2632)
  • designated port (2634)
  • filtering and permanent databases (2636)
  • parallel bridges (2638)
  • path cost (2640)
  • port (2642)
  • port ID (2644)
  • port number (2646)
  • port priority (2648)
  • resolution (2650)
  • root bridge (2652)
  • root port (2654)
  • spanning tree (2656)
  • tunnel
  • ASRT bridge configuration command (2835)
  • tunnel configuration commands
  • add (2850)
  • delete (2853)
  • join (2856)
  • list (2859)
  • tunnel feature
  • prompt (2790)
  • tunneling
  • bridge tunnel (2659)
  • type (3074)
  • U
  • UDP destination
  • adding (3115)
  • UDP forwarding
  • enabling/disabling (3112)
  • udp-forwarding
  • IP monitoring command (3193)
  • update
  • IP configuration command (3152)
  • IPX filter configuration commands (3769)
  • NetBIOS filtering configuration command (2954)
  • V
  • virtual channel connection (VCC)
  • CIP (3555)
  • Virtual Router Redundancy Protocol, configuring (3119)
  • vrid
  • IP monitoring command (3195)
  • vrrp
  • IP monitoring command (3197)
  • W
  • weight
  • OSPF monitoring command (3295)

  • [ Top of Page | Previous Page | Table of Contents | Index ]